Rackmount Mart - PS2 300W Mini Redundant Power Supply -PS3012

ATX12V 300W mini redundant Power Supply

300+300 watts Output power

1+1 Redundant Configuration

PSII Mini Redundant Power

Meet 4U Rackmount Application

Dimensions: 150(W) x 86(H) x 175(D) mm

Features:

Universal Power Input

Front panel LED to Indicate Power Status

Available for Dual AC Input Type

Remote DC Sense on +5V and +3.3V

Power Fault Alarm Signals

Over Voltage Protection

Over Current Protection

Over Power Protection

Short Circuit Protection

MTBF >100,000 Hours

General Specifications:

Input Range: 100 to 240 VAC, +/-10%

Power Factor: 0.95 minimum

Efficiency: 65% minimum, at full load

Hold up Time: 20mS minimum, at full load

PSON (Remote ON/OFF): TTL compatible signal

Power Good: 100 to 500 ms, TTL compatible signal

Cooling Fan: 60x60x20 mm

Operating Temperature: 0 to 50 degree

Operating Humidity: 20 to 90 %

Electrical Specifications:

Regulation, Ripple & Noise:

Output	+5V	+3.3V	+12V	-5V	-12V	5Vsb
Load Regulation	± 5%	± 5%	± 5%	± 10%	± 10%	± 5%
Cross Regulation	± 5%	± 5%	± 5%	± 10%	± 10%	± 5%
Line Regulation	± 1%	± 1%	± 1%	± 1%	± 1%	± 1%
Ripple & Noise	50mV	50mV	120mV	100mV	120mV	50mV

Input and Output Ratings:

Input		Output
Frequency	Current	Watt	Load	+5V	+3.3V	+12V	-5V	-12V	5Vsb
47-63 Hz	6A max	300W	Max Load	36A	16A	14A	0.5A	1.0A	2A
47-63 Hz	6A max	300W	Min Load	3A	1A	1A	0A	0A	0A

Note: 1. The +5 & +3.3 Volt combine total output shall not exceed 150W.

2. The +5, +3.3 and +12 Volt combine total output shall not exceed 270W.

3: Noise bandwidth is from DC to 20 MHz.

Toll Free : 1-888-865-6888 Fax : 510-226-8968 Email : sales@RackmountMart.com

Product images may be generic and may not reflect actual item purchased. Synergy Global Inc is not responsible for any typographical errors. Specifications subject to change without notice. Legal.